How To Install A Faucet Cartridge
How to Replace a Kitchen Faucet
Kitchen faucets are probably one of the most used fixtures in homes. Many times a mean solar day the water is turned on and off, leading to quite a scrap of wear and tear on this hardworking fixture. If your faucet has seen ameliorate days, or is out of style, y'all can replace it with a shiny new version using just a few tools. Exchanging your quondam kitchen faucet with a new ane can transform the await and functionality of your kitchen in but a couple of hours.
Tools you lot'll Demand
Have all the necessary tools for this DIY project lined up before you commencement to save yourself time and frustration.
- New Faucet
- Channel locking pliers
- Basin wrench
- Plumber's Putty
- Adaptable Wrench
- Flexible supply lines
- Tape Measure
Before Starting
Turn off the hot and common cold water shut-off valves. they're usually located in the chiffonier that'southward under the sink. Then open up the faucet to salvage pressure.
Removing the Old Faucet
- Step Ane: Using an adjustable wrench and a pair of channel locking pliers, disconnect both the water lines from the faucet. If the supply lines are old, or the gaskets are worn out, you may want to replace them with flexible supply lines.
- Step Two: Using a socket wrench or basin wrench remove the nut that is holding the faucet tailpiece assembly in place. Sometimes it's hard to loosen old faucet nuts, in that case try soaking the threads with penetrating oil and try again.
- Step Three: If your sink has a line that connects the hose to the faucet you tin disconnect this.
- Step 4: Pull the former faucet out and clean the sink's surface making sure to remove any rust or caked on debris.
Installing the New Faucet
- Step One: Using the measuring tape, measure the distance, from eye to eye, of the outside holes of your sink. This is to make sure the new faucet will fit. Since all faucets are slightly unlike, read any installation instructions that come up with your new faucet. Follow all manufacturer's pre-associates instructions and place the optional flange over the faucet opening.
- Pace Two: Seal the new faucet. If yous're using a gasket, place the gasket on the lip of the plate and thread the hoses through. If using plumber'due south putty, apply it around the base of the faucet and set the faucet in place.
- Step 3: Nether the sink you can now thread on the flange and nut using a socket or basin wrench.
- Stride Four: If you're using pull-out faucets, a weight needs to be added that will retract the pull-out spray.
- Footstep Five: Now it's fourth dimension to adhere the supply lines to the faucet and then to the shut-off valves. Cold water connects on the correct and hot water on the left.
- Stride Six: Turn on the water and cheque for leaking. If you find whatsoever leaks you'll need to tighten the connections on the water supply line.
Source: https://www.questionsanswered.net/article/how-to-replace-a-kitchen-faucet?utm_content=params%3Ao%3D740012%26ad%3DdirN%26qo%3DserpIndex
Posted by: hallfromen77.blogspot.com
0 Response to "How To Install A Faucet Cartridge"
Post a Comment